Your shopping cart is empty
Visit the shop
(SS25X102Y12Z13D001) The 4 inch long component is used in Camera Mount assemblies to interface to cameras or mounting surfaces. The component is made from either white or black Acetal. The mounting holes include 1 in the center with a hole on either side at 1/2 inch spacing. All the mounting holes are 0.261 inches in diameter.
(SS13X75Y12Z03D001) The 3 inch long lever Arm Lock device is used to lock the camera mount elevation angle in place. The Lever arms are clamped at a specific elevation angle with the lever arm lock piece and two 8-32 screws. The screws should only be tightened to be snug as to avoid stripping the threaded holes in the lever arms. Because of the lever arm lengths, the lever arm lock piece will make a secure clamping of the device at a specific angle. The lever arm lock piece comes in clear acrylic material.
(SS13X75Y12Z10D001) The 3 inch lever arm is a simple and highly effective way to lock the elevation angle of a camera mount assembly. For stereo vision and structured light illumination systems, locking the camera angles allows the user to only calibrate the system one time. The lever arm is made from either white or black acetal. It has 2 holes tapped to fit 8-32 screws.
WARNING: Do not exceed 10 in-Lbs of torque or the threads may strip. This is what most people would call "snug" or "finger-tight. We recommend you search "torque wrench screwdriver" to find a tool that measure torque at 10 in-Lbs level.