Shop

Shopping Cart

Your shopping cart is empty
Visit the shop

Also see our store at Etsy

38mm Blank Square Block BS38Y12Z10D000

(BS38Y12Z10D000) 38 mm x 38 mm x 10 mm Blank Square Block for customization. In inches this is a 1.5 in x 1.5 in x 3/8 in Blank Square Block. Blocks come in unpolished White or Black Acetal. Colors are indicated in selection but usually include black or white Acetal material.

Product Options
Combination of product variants is not available
Quantity

Price: $4.67

Loading Updating cart...

50 mm Round AC50Y12Z10D055

AC50Y12Z10D055 is a 50 mm diameter round with a 3/8 inch center hole. The edge holes are tapped to 1/4-20 and the face holes are not tapped. Made from either unpolished black or white Acetal.

Product Options
Combination of product variants is not available
Quantity

Price: $10.00

Loading Updating cart...

Camera Mount Assembly CamMount50Y12D000001

Camera Mount

The CamMount50Y12D000001 camera mount assembly is a low cost, light weight, camera mount. It uses four 50mm rounds (AC50Y12Z10D055) as hinges sandwiched between two 25 mm x 100 mm interface plates (SS25X102Y12Z13D001). On each mounting plate the three mounting holes are spaced by 12.6 mm apart and are  6.63 mm diameters (i.e., 0.261 inches). The mounting holes support clearance for 1/4-20 bolts.

Product Options
Combination of product variants is not available
Quantity

Price: $60.00

Loading Updating cart...

Camera Mount Assembly CamMount50Y12D000003

The CamMount50Y12D000003 camera mount assembly is a low cost, light weight, camera mount. It uses four 50mm rounds (AO50Y12Z10D055) as hinges sandwiched between two 25 mm x 100 mm interface plates (SS25X102Y12Z13D001). The elevation angle is locked with support components which include two lever arms (SS13X75Y12Z10D001) and one lever arm lock (SS13X75Y12Z03D001). On each mounting plate the three mounting holes are spaced by 12.6 mm apart and are  6.63 mm diameters (i.e., 0.261 inches). The mounting holes support clearance for 1/4-20 bolts. The lever arms have holes tapped to fit 8-32 screws.

WARNING: When tightening screws in tapped holes, do not exceed 10 in-Lbs of torque or the threads may strip. This is what most people would call "snug" or "finger-tight. We recommend you search "torque wrench screwdriver" to find a tool that measure torque at 10 in-Lbs level.

Product Options
Combination of product variants is not available
Quantity

Price: $66.00

Loading Updating cart...

CE2015: Grow Collector’s Edition

See Grow Video for explanation of game play. Grow is a 3-Dimensional building game where 2-4 players guide the constant growth of a tree and compete by blossoming flowers around it. The game features a simple-to-learn set of rules, ideal for ages 8 years and older. For the more seasoned players, Grow offers a deep level of strategic nuance. We have a limited number of Grow Collector's Edition CE2015 for sale. This game is hand made in the USA and excellent quality.

 

Additional DescriptionMore Details

Most pieces have a long dimension of 2.5” and are about 0.2” thick. Shipping weight is about 7.8 lbs. There are 158 components included with the CE2015 which include 1 wooden box, 1 rule book, 1 event die, 1 base, 2 trunks, 20 branches, 40 leaves, 12 beetles (4 colors), 40 buds (4 colors) and 40 flowers (4 colors).

Quantity

Price: $80.00

Loading Updating cart...

Cubeoctahedron •Blocks

The cubeoctahedron is a well known solid with 8 equilateral triangular faces and 6 square faces all with equal length sides. They can be used to interconnect other polyhedrons with triangular or square sides. Our cubeoctahedron •Blocks (dot blocks) come 2 per order along with 2 magnet connectors. The cubeoctahedrons come ASSEMBLED or in KIT form. For the KIT form we recommend using a building mold pair to help construct the otherwise unstable cubeoctahedron. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Clear. The kits include 16 triangles and 12 squares, each with a magnetic receptor already glued in place. Water based glue can be used to assemble the kits. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 2 cubeoctahedrons and 2 magnet connectors.

DETAILS: Triangles and squares are 29 mm (~1.2 inches) along each side. Magnets are 1/4 inch diameter cylinders 1/4 inch long.

Product Options
Combination of product variants is not available
Quantity

Price: from $7.00

Loading Updating cart...

D10 Dice Double Digit 00 thru 90

Fully rollable Jumbo D10 Double Digit dice (00 thru 90) made from birch ply with approximately 59 mm (i.e., ~2.4 inches) between opposite faces. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D10 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $8.00

Loading Updating cart...

D10 Dice Single Digit 0 thru 9

Fully rollable Jumbo D10 Single dice (0 thru 9) made from birch ply with approximately 59 mm (i.e., ~2.4 inches) between opposite faces. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D10 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $8.00

Loading Updating cart...

D12 Dice

Rollable Jumbo D12 dice made from birch ply with approximately 66 mm (~2.6 inches) between opposite faces. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D12 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $9.00

Loading Updating cart...

D20 Dice

Rollable high quality Jumbo D20 dice made from birch ply with approximately 72 mm (i.e., ~3 inches) between opposite faces. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D20 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $10.00

Loading Updating cart...

D4 Dice

Jumbo D4 dice made from birch ply with approximately 63 mm (i.e., ~2.5 inches) high. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D4 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $5.00

Loading Updating cart...

D6 Dice

Rollable high quality Jumbo D6 dice made from birch ply with approximately 59 mm (i.e., ~2.4 inches) between opposite faces. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D6 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $6.00

Loading Updating cart...

D8 Dice

Rollable high quality Jumbo D8 dice made from birch ply with approximately 59 mm (i.e., ~2.4 inches) between opposite faces. Can order 4 different finishes which are Dark Walnut, Cherry, Brown and Clear. D8 is hollow inside and has several coats of clear lacquer to protect the outside surface. With a simple hook, it can be used as a novel tree ornament.

Product Options
Combination of product variants is not available
Quantity

Price: $7.00

Loading Updating cart...

Dice Set for RPGs

A full set of Jumbo dice used for role playing games (RPGs). The set includes one D4, one D6, one D8, one single digit D10 (0 to 9), one double digit D10 (00 to 90), one D12 and one D20. They are made from birch ply with approximately 66 mm to 72 mm between opposite faces. D20 (72mm), D12 (66mm), D10s (59 mm), D8 (59 mm), D6 (59 mm) and D4 is 63 mm high. Set comes in 1 of 3 different finishes which are Cherry, Brown and Clear. The dice are hollow inside and have several coats of clear lacquer to protect the outside surface. With a simple hook, they can be used as novel tree ornaments. And the price of the set is significantly less cost than purchasing the dice individually.

Product Options
Combination of product variants is not available
Quantity

Price: $35.00

Loading Updating cart...

Dodecahedron •Blocks

The dodecahedron is a well known platonic solid with 12 equilateral pentagonal faces. Our dodecahedron •Blocks (dot blocks) come 2 per order along with 2 magnet connectors. The dodecahedrons come ASSEMBLED or in KIT form. For the KIT form we recommend using a building mold to help construct the dodecahedron. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Clear. The kits include 24 pentagons, each with a magnetic receptor already glued in place. Water based glue can be used to assemble the kits. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 2 dodecahedrons and 2 magnet connectors.

DETAILS: Pentagons are 30 mm (~1.2 inches) along each side. Magnets are 1/4 inch diameter cylinders 1/4 inch long.

Product Options
Combination of product variants is not available
Quantity

Price: from $7.00

Loading Updating cart...

Hexahedron •Blocks

The hexahedron or cube is a well known platonic solid with 6 square faces. Our hexahedron •Blocks (dot blocks) come 5 per order along with 5 magnet connectors. The hexahedrons come ASSEMBLED or in KIT form. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Clear. The kits include 30 squares, each with a magnetic receptor already glued in place. Water based glue can be used to assemble the kits. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 5 hexahedrons and 5 magnet connectors.

DETAILS: Squares are 29 mm (~1.2 inches) along each side. Magnets are 1/4 inch diameter cylinders 1/4 inch long.

Product Options
Combination of product variants is not available
Quantity

Price: from $7.00

Loading Updating cart...

Icosahedron •Blocks

The Icosahedron is a well known platonic solid with 20 equilateral triangular faces. Our Icosahedron •Blocks (dot blocks) come 2 per order along with 2 magnet connectors. The Icosahedrons come ASSEMBLED or in KIT form. For the KIT form we recommend using a building mold to help construct the dodecahedron. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Clear. The kits include 40 triangles, each with a magnetic receptor already glued in place. Water based glue can be used to assemble the kits. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 2 icosahedrons and 2 magnet connectors.

DETAILS: Triangles are 29 mm (~1.2 inches) along each side. Magnets are 1/4 inch diameter cylinders 1/4 inch long.

Product Options
Combination of product variants is not available
Quantity

Price: from $7.00

Loading Updating cart...

Interface Plate SS25X102Y12Z13D001

(SS25X102Y12Z13D001) The  4 inch long component is used in Camera Mount assemblies to interface to cameras or mounting surfaces. The component is made from either white or black Acetal. The mounting holes include 1 in the center with a hole on either side at 1/2 inch spacing. All the mounting holes are 0.261 inches in diameter.

Product Options
Combination of product variants is not available
Quantity

Price: $10.00

Loading Updating cart...

Jumbo Dice Christmas Tree Hook Adapter

Christmas Tree Hook Adapter allows you to use the Jumbo Dice as Christmas tree ornaments. The adapters can be inserted into the corners of the D8, D10s, D12 and D20s. However, to use it with the D4 or D6, which do not have corner holes, You will need to drill a 5/64 inch corner hole. SHIPPING IS FREE IN THE USA!

Quantity

Price: $1.00

Loading Updating cart...

LA1: Shoebox Design Application for Laser Cutter Applications

See ShoeBox demo on Youtube: Software and Assembly and applying cover art!

We also have a store at ebay!

Once you complete the Check Out process, we will send you an email with a link to download your software, if you use a gmail.com account or we will send you an email with a .zip attachment. USER MANUAL and TEST DATA can be downloaded anytime.

The ShoeBox Designer software application provides the box designer with custom vector format data files (.plt and .svg) to be used to laser cut box pieces. The user provides the inside dimensions of the box, as well as material thickness, laser beam diameter and some additional design parameters and ShoeBox Designer does the rest and outputs the vector files to cut the components out. It also produces vector files to aid in (1) laying out artwork for engraving and (2) layout for covering the box with printed artwork. As a "Little App" the ShoeBox Designer is a single .exe file that does not require installation. Just copy it to the folder you want to run it from. The interface is intuitive but includes built in help buttons and a detailed user manual. We priced ShoeBox Designer at our 2 Chai Tea Latte price. And thank you for our morning drink!

 

 

Additional DescriptionMore Details

Features of Little Applications and in particular ShoeBox Designer are: 1. Single executable file “LittleApp_ShoeBox.exe” that does not require an installation process. Just copy and paste. 2. Customer owns it but cannot sell, share or distribute the application. 3. ShoeBox Designer compensates for beam diameter and allows adjustment for looser or tighter finger joints. 4. ShoeBox Designer has variable number of finger joints along the width, length and height of box. 5. ShoeBox Designer stores data in common vector formats HPGL (.plt) and Scalable Vector Graphics (.svg). These formats can be imported into most laser cutters and photo editors. 6. ShoeBox Designer has built in help documentation. 7. ShoeBox Designer provides graphic templates in HPGL and SVG to aid in engraving layout or in graphical layout of artwork.

Quantity

Price: $6.90

Loading Updating cart...

LA2: Box Divider Designer for Laser Cutter Applications

See Divider demo on YouTube: Examples Pillow Box, Divider Designer Tutorial

We also have a store at ebay!

Once you complete the Check Out process, we will send you an email with a link to download your software, if you use a gmail.com account or we will send you an email with a .zip attachment. USER MANUAL and TEST DATA can be downloaded anytime.

The Box Divider Designer software application provides the designer with custom vector format data files (.plt and .svg) to be used to laser cut divider pieces. The user provides the number of rows and columns in the divider as well as cell dimensions and material thickness, laser beam diameter and some additional design parameters. The BoxDivider Designer does the rest and outputs the vector files to cut the components out. It also produces vector files to aid in (1) laying out artwork for engraving and (2) layout for indicating the contents of each cell. As a "Little App" the Box Divider Designer is a single .exe file that does not require installation. Just copy it to the folder you want to run it from. The interface is intuitive but includes built in help buttons and a detailed user manual. We priced Box Divider Designer at our 2 Chai Tea Latte price. And thank you for our morning drink!

Additional DescriptionMore Details

Features of Little Applications and in particular LA2 are: 1. Single executable file “LittleApp_BoxDivider.exe” that does not require an installation process. Just copy and paste. 2. You own it but you can’t sell, share or distribute the application (see licensing agreement). 3. The designer specifies the cell sizes and the number of rows and columns of cells. 4. LA2 compensates for beam diameter and allows adjustment for looser or tighter sockets. 5. LA2 produces two types of dividers, (1) a simple rectangular shape and (2) a rectangular shape with finger slots. 6. LA2 two types of dividers can be manually edited to have merged cells and customized finger slots. 7. LA2 stores data in common vector formats HPGL (.plt) and Scalable Vector Graphics (.svg). These formats can be imported into most laser cutters and photo editors. 8. LA2 has built in help documentation. 9. LA2 provides graphic templates in HPGL and SVG to aid in engraving layout or in graphical layout of artwork.

Quantity

Price: $6.90

Loading Updating cart...

Lever Arm Lock SS13X75Y12Z03D001

(SS13X75Y12Z03D001) The 3 inch long lever Arm Lock device is used to lock the camera mount elevation angle in place. The Lever arms are clamped at a specific elevation angle with the lever arm lock piece and two 8-32 screws. The screws should only be tightened to be snug as to avoid stripping the threaded holes in the lever arms. Because of the lever arm lengths, the lever arm lock piece will make a secure clamping of the device at a specific angle. The lever arm lock piece comes in clear acrylic material.

Product Options
Combination of product variants is not available
Quantity

Price: from $1.00

Loading Updating cart...

Lever Arm SS13X75Y12Z10D001

(SS13X75Y12Z10D001) The 3 inch lever arm is a simple and highly effective way to lock the elevation angle of a camera mount assembly. For stereo vision and structured light illumination systems, locking the camera angles allows the user to only calibrate the system one time. The lever arm is made from either white or black acetal. It has 2 holes tapped to fit 8-32 screws.

WARNING: Do not exceed 10 in-Lbs of torque or the threads may strip. This is what most people would call "snug" or "finger-tight.  We recommend you search "torque wrench screwdriver" to find a tool that measure torque at 10 in-Lbs level.

Product Options
Combination of product variants is not available
Quantity

Price: $2.00

Loading Updating cart...

Octahedron •Block Molds

The Octahedron Mold is used to help assemble the Octahedron Kit. We found that the mold has an interesting aesthetic so we designed it to be a compatible building component for the •Block erector set. The octahedron is a well known platonic solid with 8 equilateral triangular faces but it is difficult to assemble because more than 3 faces intersect each vertex, making it unstable until all faces are joined. Having the Octahedron Mold gives the pieces stability during assembly and gluing. Our octahedron •Block Molds come 2 per order along with 2 magnet connectors. This means you can glue the top and bottom halfs of an octahedron and then join them before the glue is fully hardened. The octahedron Molds come ASSEMBLED. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Au Natural. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 2 octahedron molds and 2 magnet connectors.

DETAILS: Magnets are 1/4 inch diameter cylinders 1/4 inch long.

Product Options
Combination of product variants is not available
Quantity

Price: $10.00

Loading Updating cart...

Octahedron •Blocks

The octahedron is a well known platonic solid with 8 equilateral triangular faces. Our octahedron •Blocks (dot blocks) come 3 per order along with 3 magnet connectors. The octahedrons come ASSEMBLED or in KIT form. For the KIT form we recommend using a building mold pair to help construct the otherwise unstable octahedron. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Au Natural. The kits include 24 triangles, each with a magnetic receptor already glued in place. Water based glue can be used to assemble the kits. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 3 octahedrons and 3 magnet connectors.

DETAILS: Triangles are 29 mm (~1.2 inches) along each side. Magnets are 1/4 inch diameter cylinders 1/4 inch long

Product Options
Combination of product variants is not available
Quantity

Price: from $6.30

Loading Updating cart...

Tetrahedron •Blocks

The tetrahedron is a well known platonic solid with 4 equilateral triangular faces. Our tetrahedron •Blocks (dot blocks) come 5 per order along with 5 magnet connectors. The tetrahedrons come ASSEMBLED or in KIT form. You have a choice of unfinished or  4 different wood finishes, Dark Walnut, Cherry, Brown and Au Natural. The kits include 20 triangles, each with a magnetic receptor already glued in place. Water based glue is can be used to assemble the kits. Because of the magnets, our •Blocks are only recommended for individuals 8 and older. The magnets should be kept away from children who might swallow them.

CONTENTS OF EACH PACKAGE: 5 tetrahedrons and 5 magnet connectors.

DETAILS: Triangles are 29 mm (~1.2 inches) along each side. Magnets are 1/4 inch diameter cylinders 1/4 inch long

Product Options
Combination of product variants is not available
Quantity

Price: from $7.00

Loading Updating cart...